Caronlab Advanced+ Stripless Fusion Wax Beads in the 5 kg size are designed for busy salon waxing rooms. The pearl-white, fragrance-free beads melt to a smooth wax with a low working temperature. A synthetic resin base with titanium dioxide gives the wax stretch and grip for stripless removal.
Suitable for face, underarm, bikini and body waxing, including brows, arms, legs, back and torso. The wax can be applied in thin, wide sections for larger areas.
Caution and Warning
Store in a cool, dry place.
Low-temperature wax for professional salon use only. Patch test before use. Do not wax over moles, warts, broken or irritated skin. Stop use if irritation occurs. Exceeding the recommended heating instructions may cause burns or injury.
Mode d’emploi
Application
• Area to be Waxed must be clean, dry and free from any oils and creams. Caronlab Australia recommends the use of Prep – Pre Wax Skin Cleanser as it has been designed to work together for best results with Caronlab Australia Waxes. Always test Wax on the inside of your wrist before use. Do not apply on warts, moles and broken or irritated skin.
• You may begin by dipping Spatula into Wax, which should be the consistency of thick honey.
• Apply Wax with the hair growth, leaving one edge thicker to create a lip. Fusion Wax should be applied in a thin layer.
• Hold skin taut and remove Wax by pulling in the opposite direction of hair growth.
• For the perfect finish we recommend you use Caronlab Soothe After Waxing Soothing Lotion Mango & Witch Hazel or Tea Tree to complete your treatment. As Advanced+ does not leave a sticky Wax residue, after waxing oil is not required.
• To clean equipment use Solvent – Wax Remover Citrus Clean.
Heating the beads
• Place Beads into the Professional Wax Heater Advanced+ 3lt or Caronlab Australia Wax Heater Insert, no higher than ¾ full.
• Heat on the highest setting for 20 minutes DO NOT Stir during this time.
• When Wax is completely melted, turn down to 75 degrees (167°F) on your Advanced+ Professional Wax Heater 3lt or between dial 3-4 on a Caronlab Australia Professional Wax Heater.
• Dip Spatula into the Wax, which should be the consistency of thick honey, if its dripping it is too hot.
• DO NOT block the edges of the Insert or Wax Heater when topping up Beads. NO MORE than a scoop at a time.
• Always work from a ¾ full Wax Heater.
SHIPPING
Shipping fees are calculated based on order weight, package dimensions, and applicable carrier regulations. The final shipping cost will be displayed at checkout prior to order confirmation.
Delivery typically takes 2–5 business days for major cities such as Halifax, Montreal, Ottawa, Calgary, and Vancouver. Shipping to other urban and surrounding areas may take up to 7 business days, depending on location and carrier timelines.
We do not ship to P.O. Boxes. A valid residential or commercial address is required for all orders.
Local delivery options are available within select areas of the Greater Toronto Area, including Mississauga, Oakville, Burlington, and nearby cities. Availability and delivery timelines may vary.
For security purposes, we do not accept credit card payments when the billing and shipping addresses differ. In such cases, payment must be completed via e-transfer.
Please note that product colors may vary slightly due to differences in screen settings and display resolutions.
RETURN
Due to the nature of beauty and personal care products, we maintain a strict no return, no exchange, and no refund policy. This policy is in place to protect both our customers and professionals by ensuring the highest standards of hygiene, safety, and product integrity.
Many items we carry—such as nail products, tools, and beauty supplies—can become compromised or unsafe once opened or handled, even if they appear unused. Accepting returns could risk cross-contamination, which is not acceptable in professional salon environments where client safety is a top priority.
By enforcing a final sale policy, we guarantee that every product you receive is new, untouched, and safe for professional use. We strongly encourage customers to review product details carefully and consult with our team if needed before purchasing.
Caronlab Advanced+ Stripless Fusion Wax Beads in the 5 kg size are designed for busy salon waxing rooms. The pearl-white, fragrance-free beads melt to a smooth wax with a low working temperature. A synthetic resin base with titanium dioxide gives the wax stretch and grip for stripless removal.
Suitable for face, underarm, bikini and body waxing, including brows, arms, legs, back and torso. The wax can be applied in thin, wide sections for larger areas.
Caution and Warning
Store in a cool, dry place.
Low-temperature wax for professional salon use only. Patch test before use. Do not wax over moles, warts, broken or irritated skin. Stop use if irritation occurs. Exceeding the recommended heating instructions may cause burns or injury.
Mode d’emploi
Application
• Area to be Waxed must be clean, dry and free from any oils and creams. Caronlab Australia recommends the use of Prep – Pre Wax Skin Cleanser as it has been designed to work together for best results with Caronlab Australia Waxes. Always test Wax on the inside of your wrist before use. Do not apply on warts, moles and broken or irritated skin.
• You may begin by dipping Spatula into Wax, which should be the consistency of thick honey.
• Apply Wax with the hair growth, leaving one edge thicker to create a lip. Fusion Wax should be applied in a thin layer.
• Hold skin taut and remove Wax by pulling in the opposite direction of hair growth.
• For the perfect finish we recommend you use Caronlab Soothe After Waxing Soothing Lotion Mango & Witch Hazel or Tea Tree to complete your treatment. As Advanced+ does not leave a sticky Wax residue, after waxing oil is not required.
• To clean equipment use Solvent – Wax Remover Citrus Clean.
Heating the beads
• Place Beads into the Professional Wax Heater Advanced+ 3lt or Caronlab Australia Wax Heater Insert, no higher than ¾ full.
• Heat on the highest setting for 20 minutes DO NOT Stir during this time.
• When Wax is completely melted, turn down to 75 degrees (167°F) on your Advanced+ Professional Wax Heater 3lt or between dial 3-4 on a Caronlab Australia Professional Wax Heater.
• Dip Spatula into the Wax, which should be the consistency of thick honey, if its dripping it is too hot.
• DO NOT block the edges of the Insert or Wax Heater when topping up Beads. NO MORE than a scoop at a time.
• Always work from a ¾ full Wax Heater.
SHIPPING
Shipping fees are calculated based on order weight, package dimensions, and applicable carrier regulations. The final shipping cost will be displayed at checkout prior to order confirmation.
Delivery typically takes 2–5 business days for major cities such as Halifax, Montreal, Ottawa, Calgary, and Vancouver. Shipping to other urban and surrounding areas may take up to 7 business days, depending on location and carrier timelines.
We do not ship to P.O. Boxes. A valid residential or commercial address is required for all orders.
Local delivery options are available within select areas of the Greater Toronto Area, including Mississauga, Oakville, Burlington, and nearby cities. Availability and delivery timelines may vary.
For security purposes, we do not accept credit card payments when the billing and shipping addresses differ. In such cases, payment must be completed via e-transfer.
Please note that product colors may vary slightly due to differences in screen settings and display resolutions.
RETURN
Due to the nature of beauty and personal care products, we maintain a strict no return, no exchange, and no refund policy. This policy is in place to protect both our customers and professionals by ensuring the highest standards of hygiene, safety, and product integrity.
Many items we carry—such as nail products, tools, and beauty supplies—can become compromised or unsafe once opened or handled, even if they appear unused. Accepting returns could risk cross-contamination, which is not acceptable in professional salon environments where client safety is a top priority.
By enforcing a final sale policy, we guarantee that every product you receive is new, untouched, and safe for professional use. We strongly encourage customers to review product details carefully and consult with our team if needed before purchasing.
